3
S T EP 1
Remove Shipping Plate
Tools: 6 mm Hex Key
•
Lay the QuickStand unit on the work surface facing up
and unscrew the (2) M8 x 10 mm Cap Head Machine
Screws holding the Shipping Plate in place (fig. A)
•
Set aside the (2) M8 x 10 mm Cap Head Machine
Screws and the Washers for Step 3
Read all instructions carefully before installing this product or attempting to use it
This product contains a loaded mechanism that is under tension. Do not attempt to
remove or alter any part of this product or in any way modify or tamper with any
component of this product other than as set forth in these instructions. Failure to
comply with the instructions provided may result in property damage or serious injury.
Do not remove bracing box attached to QuickStand unit until your QuickStand is
fully assembled
WARNING
A
B
S T EP 2
Attach Base Plate
Tools: 5 mm Hex Key
•
Secure the Base Plate in place using (6) M8 x 18 mm
Flat Head Machine Screws (fig. B)
Summary of Contents for Quickstand
Page 1: ...INSTALLATION INSTRUCTIONS ...
Page 11: ......
