ECOMENDATIONS & WARNINGS
MAINTENANCE
•
Use the shin guard correctly according to the present manual terms.
•
Do not disassembly or manipulate the device.
•
Protect the integrity of the device and do not damage parts or surfaces. Do not pierce or peel off the
shin guard padding.
•
Do not expose to extreme heat temperatures due to excessive sun exposure.
•
Keep the shin guards stored in a cool and dry place inside the bag together with the charging base
while they are not being used.
•
Protect the device from water.
•
The devices must not be thrown or hit outside of their normal use.
CLEANING
•
Cleaning the device should be done by rubbing with a soft, damp cloth, without immersing or putting
the device under a stream, and without applying excessive pressure to the padding.
•
Use only water. Do not use solvents, alcohols, paints or any other type of chemical product.
WARNING
The HX50 is not a medical device and therefore should not be used for diagnostics or as a substitute
for obtaining measurements that require the use of a laboratory or precision medical device.
BATTERY
To obtain the maximum performance and durability of the battery it is necessary to follow these
recommendations. Failure to follow these recommendations can reduce battery life or cause
irreversible damage and the device could stop working.
•
If the device is stored for a long period of time, ensure that the ambient temperature is kept between
15 °C and 35 °C.
•
Do not use the device if the temperature reaches values outside the range between -10 °C to 60 °C.
•
Do not charge the device if the ambient temperature reaches values outside the range between 10 °
C to 45 °C.
•
Do not pierce or bend the device.
•
Do not expose the device to high temperatures.
•
Do not bring the device close to fire.
•
Do not immerse or put under a direct stream of water.
•
Do not remove the protections or stickers from the battery or the circuit.
•
Do not replace or modify the battery or the electronics of the device.
•
The battery is a fixed element in the electronics of the device that cannot be replaced or modified.
The only valid charging method is inserting the shin guard into the charging base provided.
•
The charging base must be powered by a PS2 source according to the 62368-1 standard.
29
