24
LNX-205 (Ver.1.0)
8.
‘BP’: Get active Ch.B LAN port
Format
BP<CR>
Function
Get the active Ch.B LAN port.
e.g.
Send
BP<CR>
Response BP,1<CR> * When Ch.B LAN port 1 is selected.
9.
‘VE’: Get product version
Format
VE<CR>
Function
Get the product version.
e.g.
Send
VE<CR>
Response LNX-205 Ver.1.0<CR> *When version is 1.0.
10.
‘PS’: Set a password for port selection
Format
PS,{PRAM1},{PRAM2}<CR>
Function
Set a password for port selection. The default password is set to
“0000”. After setting a password other than “0000”, enable the port
selection with the E command to enable the 0 to 4 command.
Parameter
PRAM1: Enter the old password.
half-width characters (up to 4 characters)
PRAM2: Enter the new password.
half-width characters (up to 4 characters)
e.g.
Send
PS,0000,1234<CR> *When changing the password from 0000 to 1234.
Response
Password setting completed<CR>
* When password change is completed
Password do not match<CR> *When password do not match.
11.
‘EP’: Enable port selection
Format
EP,{PRAM}<CR>
Function
Port selection is enabled. The default password is set to “0000”. After
setting a password other than “0000”, E command is enabled.
Parameter
PRAM: Enter the password.
half-width characters (up to 4 characters)
e.g.
Send
EP,1234<CR> *When a password is set to “1234”.
Response
Enable LAN port control<CR> *When port selection is enabled.
Password do not match<CR> *When password do not match.
