16
LNX-205 (Ver.1.0)
TCP keepalive
TCP keepalive time defines how many seconds LNX-205 waits
during an inactive connection before checking its status. If the unit
does not receive a response 7 consecutive times, it drops that
connection. Enter a value between 0 and 65 seconds. 0 disables
keepalive.
The default setting is 5.
Telnet Com port
control (RFC2217)
Set to enable when control COM port using Telnet.
The product enables a RFC2217 function to use a control signal used
in a serial port on a network. When it is not used this function, set
to disable.
I/O buffer clear
setting
Set it whether input/output buffer clear at the time of network
connection or disconnection.
Password setting
If you set a password for TCP connection, you must enter the
password before connecting. If you set a configuration password, you
can restrict access to the setting screen that is displayed by entering
the IP address from the browser.
TCP connection: half-width characters (up to 15 characters)
Configuration: half-width characters (up to 16 characters)
*Password is not read even if [Reading Data] or [Read from
Network] is performed with this tool.
* Password setting supported in product version 1.2 or later.
