8
B.
Pressing the “M” button will switch
the unit of measure between “mg/dl”
and “mmol/l”. Click the “Set” button and
the meter advances to patient condition
index setting.
7. Enable/Disable the Patient Condition
Index
A.
A flashing “C.OFF” or “C. ON” will
appear on the screen. This indicates
whether entering the patient condition
index during measurement mode is
disabled or enabled.
B.
Click the “M” button to switch between
disabled and enabled. After the meter
settings are complete, press the “Set”
button. “OFF” will be displayed on the
screen and the instrument will shut
down.
Note:
Before each test, please make sure the
preferred unit of measurement is set.
Make sure that the sequence of setup is
completed, or the settings will not be
stored.
2.3 Coding the Meter
The HumaSens Glucose Meter must be
coded before testing with HumaSens test
strips for the first time, or every time a
new lot of glucose
test strips is used.
Each vial of glucose
test strips has an
assigned code number. The code strip is
packaged with the test strips and used to
code the meter.
7 A
7 B
Chapter 2 Meter Setup
