Human Touch Perfect Chair PC-350, Use & Care Manual, Page: 4 / 22

5
humantouch.com
4
get ready
5
UNPACK THE BOXES
Chair frame Headrest frame
Arm core
Body pad Head pad Head pillow
Phillips-head
screwdriver
3/16-inch
Allen key
1. Raise the chair to an upright position.
ATTACH THE BACKREST FRAME
For your convenience, and to better position the chair for the remaining
assembly, plug in the chair, then use the electric recline lever to adjust the chair
to an upright position.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
2. Remove the backrest frame screws.
CAUTION:
Plug the chair into an appropriate power source. Be sure that the
power cord lies beneath the mechanics located underneath the chair.
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
Smooth the body pad into place, from the footrest toward the
seat. Pull up on the backrest pad until the hook-and-loop
fastener strip on the back of the pad aligns with the hook-
and-loop fastener strip on the chair canvas, then press the
two strips firmly together.
With the backrest frame positioned so that the headrest can
tilt forward, slide the two ends of the backrest frame into the
open tube ends of the chair frame.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
3. Insert the headrest frame into the chair frame.
4. Replace the backrest frame screws.
Pull the chair canvas firmly upward as far as it will go, wrap the
top flap around the backrest frame, align the two hook-and-loop
fastener strips, then press them firmly together.
It is important
that the canvas be stretched tight to provide proper back
support.
5. Install the canvas backrest support.
Hook-and-loop-fastener
strips aligned
Hook-and-loop-fastener strips aligned
Canvas
2. Secure the body pad.
Your Human Touch
®
Perfect Chair
®
requires some simple assembly. Just
attach the backrest frame, pads, arm caps, and head pillow, and you’re done!
Screw (4)
Arm cap (2)
Screw (6)
ENGLISH