Human Touch AcuTouch 6.0 Service Manual Download Page 3

Page: 3 / 3

1. Place the new Main PCB into place.

2. Using the Phillips-head screwdriver, secure the main PCB by replacing the ten screws you removed earlier, then reconnect the 24 connectors.

3. Reconnect the cable from the Main PCB to the safety sensor.

4. Replace the zip ties in the same locations from which you removed them, to secure the cable harnesses.

5. Place the safety sensor cover into position.

6. Attach the cover to the chair using the zipper.

7. Secure the safety sensor cover using two screws.

8. Plug in the chair and power it on, then verify that all the functions are functioning are now working properly.

Please send any questions or comments regarding these instructions to:

Human Touch

, LLC.

INSTALLING THE NEW BACKREST ACTUATOR

Summary of Contents for AcuTouch 6.0

Page 1: ...ies paper clip NOTE SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY REPLACING THE MAIN PCB April 04 2012 It is imperative that Human Touch products are repaired in a manner that ensures product safet...

Page 2: ...g 4 8 Disconnect the connector from the safety sensor Fig 5 9 Using a Phillips head screwdriver remove ten screws from the center of the Main PCB which secures the PCB to the chair Fig 5 10 Remove the...

Page 3: ...ons from which you removed them to secure the cable harnesses 5 Place the safety sensor cover into position 6 Attach the cover to the chair using the zipper 7 Secure the safety sensor cover using two...

Brands by name