Model 9109
Single or Double LCD Stand
Installation Instructions
Ergonomic mounting solutions for monitors and keyboards.
IOP-502574
Step 4 Monitor to Pole Assembly
Step 5 Tilt Mechanism Adjustments
Your assembly and modi
fi
cations are complete.
After securing the plate to the
fl
at panel insert the tilter into the arm.
Screw the 10-32” Philips Pan Head screw and washer and fasten them to the
hole in the underside of the tilter shaft, locking the monitor in place.
Tilt the monitor so it faces upward and locate the set screw under the tilter.
Insert the 7/32” Allen wrench into set screw to adjust the tilt friction.
* To tighten friction turn the wrench to the right.
* To loosen, turn the wrench to the left.
