26
www.humancaregroup.com
Altair
Suspending the lift from the rail
Hand control
Place the lift on a suitable surface. Feed out
enough of the belt by pulling gently on the
hook on the lift belt (2) while at the same time
keeping the Down button on the hand control
or on the control panel of the lift pressed in.
Hook onto the hook on the distance strap han-
ging from the rail roller diagonally from above
(see fig)
Switch on at the mains and the lift is ready for
use.
The hand control is equipped with an Up but-
ton (1) and a Down button (2) for raising and
lowering the lift.
When the lift is loaded with less than approx.
40 kg it can be run at two speeds. If the Up
or Down button is pressed for longer than 3
seconds, the lift will run in the faster mode. If
the lift is loaded with more than approx. 40 kg it
will only run in the slower mode.
On the short side of the hand control there is an
input for charging the lift and an input (USB-C)
for communicating with the lift.
2
1
2
