HULTSTEINS ECOFRIDGE DISPLAY, User Manual

Page: 12 / 16

12
HULTSTEINS.COM USER MANUAL
DISPLAY
ECOFRIDGE
MENU SYSTEM
OPTIONS
DATE AND TIME
can be adjusted. This should be done at least in
conjunction with the transitions between summer and winter
time.
Press the EDIT button to access the editing window. Use + AND
- to increase or decrease one value at a time. Press OK after
setting the minute figure to exit the window. The adjusted
time will appear within one minute.
DEFROST AUTO can be turned off if desired.
The values OFF / ON can be set via the SWITCH button.
FOR EACH DAY AND NIGHT OPERATION , the user can choose
whether the process should start as soon as the power is
switched on or if the
START button needs to be pressed.
HEATING AT DEEP FREEZE TEMPERATURES is not normally used.
Certain types of goods may require heating even in very cold
temperatures.
HYSTERESIS is the permissible deviation from the set value.
In other words, the temperature difference at which the
refrigerating machine switches on or off. For example, the set
point is set at 4° and the hysteresis at 2°. The unit stops at 2°
and starts at 6° in cooling mode. A high value gives rougher
control than a lower value. There will be a break of 30 minutes
between cooling and heating. The block is removed for manual
changes.
RESET SETTINGS sets all the values in this menu to the factory
default values. Try a reset before you contact service for
support. This can often help to rectify errors which are
actually caused by one or more settings being set incorrectly
in relation to the current operation.
DISPLAY
LIGHTING AND CONTRAST
are set locally in the display module.
They have an immediate effect. You can manually set the
brightness of the backlight display. The system can switch off
the backlight automatically to save power.
PASSWORD
Enter the seed code. If necessary, this can be given by
Hultsteins to the service technician over the phone. The
user will then be given a time-limited password to enter here.
Scroll with the < and > buttons to the right number, letter
or command and press
SELECT
to add the number to the
password.
To delete an incorrect character, scroll to DEL and press
SELECT
to delete a character.
To finish, scroll to the word SAVE and press SELECT. The display
then exits the menu. When you open it again, you will have to
change your password. More options will now be available.
You can also adjust the contrast. Note that the panel location
will affect the contrast that is needed. Try to find the best
setting in view of the location. When the system is switched
on, the contrast is briefly in an end position.
2019-10-14 14.36
CANCEL
-
+
OK STOP
Date: 2020-02-24 10:03
Defr. auto 1: On
Night auto start 1: On
Day auto start 1: Off
BACK UP
TOGGLE DOWN STOP
Background lighting
-
+
OK STOP
Contrast
-
+
OK STOP
Seed: 63206 Password >>:
Shift Del Save
CANCEL
< >
SELECT STOP
a b c d e f g h i j k l m n o p q r s t
u v w x y z å ä ö 0 1 2 3 4 5 6 7 8 9