HULTSTEINS ECOFRIDGE DISPLAY, User Manual

Page: 10 / 16

10
HULTSTEINS.COM USER MANUAL
DISPLAY
ECOFRIDGE
PANEL SETTINGS
PANEL SETTINGS (HUD)
All information and all settings have been collected together
in a menu structure (found on the last page).
To make any changes, first enter the system and then return
to the control panel to view the changes on the display. This
normally means a small delay before the change are visible.
SETTING THE TEMPERATURE
SET.
Press SET to access the temperature settings.
+ AND -
The + and - buttons can be seen in the window.
These are used to increase or decrease the set value.
SAVE. Press the SAVE button to send the new value to
the system.
CANCEL The CANCEL button leaves the window without
sending anything to the system. The old setting remains.
TWO-ZONE UNIT
For models with 2 zones, two temperatures and two symbols
are displayed. These are called
Box 1 and Box 2
. Box 1 is
generally the master unit and Box 2 is the slave.
In the case of unit HS215, Box 1 is always on the left side and
Box 2
on the right. This also means that you now have two
units to control via the menus in future.
Stopped Stopped
2018-12-12 14.09
Box 1
(Set p. -22°)
Box 2
(Set p. -22°)
START SET P. MENU STOP
Set p. 1: 3°
CANCEL
-
+
SAVE STOP
1
0
2018-12-12 14.09
24°
Stopped
START SET P. MENU STOP
Box Temp
(Set p. -22°)