P R O C E D U R E S
32
SuperSaw En010906b_ss350.FM
Procedures
Refilling chain lubrication oil
Warning!
Before performing any maintenance or service work,
lower the attachment to the ground and shut off the
engine. Turn off any master shut-offs and do not
allow personnel in the cab.
Warning!
The attachment has sharp edges. Use proper
wrenches and protective gloves when working on the
attachment.
1.
Place the unit steady on the ground and shut off the
engine.
2.
Clean the area around the refilling cap to avoid
contamination of the lubrication oil tank.
3.
Open the refilling cap and make sure that the strainer
isn’t missing or damaged.
Note!
NEVER refill lubrication oil with the strainer
missing or damaged.
Note!
Debris in the lubrication tank can cause check
valves in the lubrication system to malfunction.
4.
Fill the tank with chain lubrication oil.
Note!
NEVER use old motor oil or hydraulic fluid in
the chain lubrication system. Always use a good
quality chain lubrication oil.
5.
Close the refilling cap.
