$ 66(0%/<$ 1'',6$ 66(0%/<
en010006a.ss550s.FM
25
Assemble the rotator to the rotator bracket
1
Place to rotator onto the rotator bracket. Make
sure that the dowel pins on the rotator fits in the
holes in the bracket.
2
Tighten the fasteners. For a proper torque
Connect the hydraulic hoses for the grapple saw to
1
Connect the hydraulic hose for saw motor ‘P’ to
the rotator port marked ‘1’.
2
Connect the hydraulic hose for saw motor ‘T’ to
the rotator port marked ‘2’.
3
Connect the hydraulic hose for saw motor case
drain to the T-fitting at the ‘grapple open’
function.
Assemble the SuperSaw 550S to the rotator bracket.
1
Place the dowel pins on the bracket in the upper
holes in the saw frame.
2
Tighten the fasteners. For a proper torque
Fig. 23
Assemble the rotator to the rotator bracket
Fig. 24 Connect the hydraulic hoses for the grapple saw
to the rotator
1
2
3
Fig. 25 Assemble the SuperSaw 550S to the rotator
bracket
