)81&7,21$ /'(6&5,37,21
EN019805.0703853c.FM
21
)XQFWLRQDOGHVFULSWLRQ
/XEULFDWLRQV\VWHP
SuperCut 0703853/0703860 is equipped with the
lubrication pump model M06(1), which supplies oil via a
cam operation to the saw chain during the entire sawing
process. The lubrication pump(1), which delivers a
maximum of 6 ml oil volume, is a piston pump that is fed
with chain oil from the lubrication oil tank(2), through the
intake (3) and delivers it to the saw chain through a check
valve (4) when the piston(5) is depressed by the cam
curve(6). The supply of oil is proportional, which means
that the volume of oil supplied depends on how much the
piston(5) is depressed. By using different cams(6), the
volume of oil and when it is supplied can be varied up to
the maximum of 6 ml.
Fig. 14
Lubrication system
Lubrication pump M06
Lubrication oil tank
Oil inlet
Check valve
Piston
Cam curve
1
2
4
3
5
6
