TE C H N I C A L D A TA
En010904c_ss350.fm
SuperSaw 350E
15
Technical data
Special tools
The following special tools are supplied with the unit and
required when servicingSuperSaw 350E.
Air pump
The air-pump is used when adjusting the saw bar
retraction speed.
See ill. 5.
Installation tool
The installation tool, P/N 0690149, is required when
replacing the check valve for the chain tensioning..
See ill.
6.
Check valve key
The check valve key, P/N 0696011, is required when
replacing the check valve for the chain lubrication. It is
also used when bleeding the chain tensioning cicuit.
See
ill. 7.
Pressure gauge hose
The pressure gauge hose, P/N 0724011, is used to connect
a pressure gauge to the pressure test points on the saw
motor manifold.
See ill. 8.
ill. 5
Air-pump, P/N 0138042
ill. 6
Installation tool, P/N 0690149
ill. 7
Check valve key, P/N 0696011
ill. 8
Pressure gauge hose, P/N 0724042
