If you want to operate the
individual emotion lamps
independently from one another,
they can be allocated to buttons
1
to
4
on the remote control unit.
To do so, the lamps must be
connected to the corresponding
channels on the control unit when
assembling the furniture units.
Please discuss this with the customer before assembly!
Activate one of the lamp groups by pressing one of the allocated buttons 1 to 4 for a
short time. The selected lamp group is now switched on and lights up in cold white.
2.3
Several emotion lamps in several furniture units
Ù
master/slave control
It is possible to adjust the emotion lamp groups in several furniture units, which may be
placed separately, with one coloured light control unit at the same time. To do so,
determine which lamp groups are meant to react together to one button.
Please discuss this with the customer before assembly!
In order to implement this option, the receivers are connected to one another by remote
control. In order to ensure that they react simultaneously to one signal, one centrally
positioned receiver needs to be programmed to be the master. Then the master takes
on the task of forwarding each operating signal to all the receivers connected (slaves).
2.3.1
Programming one receiver to be the master
Press the marked point on the housing of the receiver which is to be the master with a
pointed object (e.g. ballpoint pen).
Press the address button below it for a short time.
Transfer to master mode is confirmed by three
long
light signals from the LED lamp.
lamp channels
1 – 4
(total
max. 30 watts)
power supply unit
max. 30 watts /
12 volt DC
Bedienungsanleitung_Farblichtsteuerung_Druck.indd 14
13.10.15 16:08