Hulk HU6511 User Manual Download Page 4

IMPORTANT SAFETY INFORMATION

PLEASE read this entire manual before attempting to use the product. 

WARNING:

 

 

1. Do not damage, drop or crush this item. Do not attempt to use the jump starter if it 
has been damaged in any way.

2. Do not charge this item in wet conditions (rain, snow, damp). Do not use this product 
in explosive environments (dust, bilge, gaseous fumes, or flammable materials).

3. Do not burn or Incinerate this product, It may explode, causing personal injury or damage. 
Taxic fumes and other potentially harmful materials are created when the battery is burned.

4. Do not disassemble this product. It may result in risk of fire, electric shock or exposure 
to battery chemicals.

5. Do not insert foreign objects into any input or output ports. This item may short circuit. 
Any metal that comes in contact with the jumper cable port may short circuit. Short 
circuiting this product will damage the battery and may cause personal injury or fire.

6. This is a Lithium ion battery. In the unlikely event that this product leaks battery 
chemicals. Do not allow contact with skin, eyes or mouth as It may cause personal injury 
or burns. If skin Is exposed to battery chemicals, wash with soap and water and rinse 
with vinegar.If your eyes come in contact with battery chemicals immediately flush with 
water and then see a medical professional.

7. When recharging this item, make sure the area is well ventillated. Please do not smoke 
or allow open flames near a charging battery.

8. Never jump start a frozen battery.

9. Please keep the product away from and out of reach of children.

10. Do not expose the battery to temperatures over over +60˚C or below -20˚C.

11. If the unit needs to be disposed of for any reason. It must be disposed of properly 
by calling your nearest lithium-ion battery recycle facility.

12. If the product malfunctions or is having problems, discontinue use and return to 
the place of purchase.

13. Store this unit in a cool dry location.

14. This unit is not designed to be used in place of a vehicle battery.

15. This unit is not designed to be used as a car battery charger. It is for jump starting only.

3

Summary of Contents for HU6511















Reviews: