QUICK START GUIDE: JUMP STARTER
IMPORTANT:
If jump starter does not jump start the engine, the jump starter may not have
sufficient charge OR the jumper cable may be improperly connected to the
vehicle battery.
NOTE:
When connecting cables: If there is an improper connection, a solid
RED LED
will appear on the Smart Cable and the unit will emit an audible alarm.
If you are hearing the alarm this means that the unit is not connected properly
and will not start the vehicle. Reset this alarm by pressing the overide button
for 3 seconds.
9
Before attempting to jump start your vehicle, please read your vehicle owners manual
to insure there are no specific steps needed.
DO NOT crank the engine for more than 4 continuous seconds while the unit is connected
to the battery. If the engine fails to crank or start, there may be a problem other than a
discharged battery.
1st step:
2nd step:
5th step:
4th step:
3rd step:
6th step:
Ensure the jump start unit has
more than 30% capacity.
Connect the red clamp to the positive “+”
terminal of the battery and the black
clamp to the negative “-” terminal of
the battery or another earth point.
Remove the battery clamp from
the jump starter and car battery.
Insert the battery clamps into
the jump starter.
If connection fails (green LED does not
illuminate solid) press the override
button for 3 seconds to reset.
When the green LED illuminates
start the vehicle, do not crank engine
for longer than four (4) seconds.