7/16
Slide in the part 9 into the groove in part 5,6 and 1, then align the hole in
the part 1 and insert the bolt A and wooden dowel D in part 5 and 6,
tighten the nut B by screwdriver and cover the screw hole by lid N after the
installation is finished.
Connect the part 3 and 4 with part 1Align the hole in the part 1 and insert
the hole in part 1, tighten the nut B by screwdriver and cover the hole by
the wooden dowel D and bolt A into lid N after installation is finished.
Connect the part 7 with part 5 and 6. align the hole in the part 7,
insert the bolt A and wooden dowel
D in part 5 and 6 into part 7.
tighten with the
nut B. cover the
screw hole after
installation
is finished.
Make sure the
groove is in
same side as
picture show.
