Hukseflux VU01, User Manual, Page: 7 / 25

VU01 manual v1614 7/25
1 Ordering and checking at delivery
1.1 Ordering VU01
The standard configuration of VU01 is with 5 metres cable. Options are: longer cable (in
multiples of 5 m and a pack of 5 dust filters. Consult Hukseflux for cable options. One
dust filter and one spare dust filter are included with VU01.
1.2 Included items
Arriving at the customer, the delivery should include:
 ventilation unit VU01
 cable of the length as ordered
 sensor mounting hardware (affixed to VU01):
- (1 x) sensor mounting plate and gasket
- (4 x) M5x10 screw
 torx key T25 (1 x)
 VU01 mounting hardware:
- (2 x) M5x60 screw
- (2 x) M5 retaining torque nut
- (4 x) ø 5 x 10 -3 m washer
 spare filter (1 x)
 product certificate
 any other options as ordered
1.3 Options
 longer cable, in multiples of 5 metres. Specify total cable length. Please consult
Hukseflux.
 pack of 5 filters. Specify order number VU01F.
1.4 Quick instrument check
A quick test of the ventilation unit can be done by using a simple hand held multimeter
and a 12 VDC power supply, using the wiring diagram in chapter 5 of this manual.
1.
Check the electrical resistance of the two heaters ; 27 Ω each
2. Connect fan wires to a 12 VDC power supply: the fan should run
3. When running, the status of the fan can be monitored by measuring a fan status
signal (see chapter 5 for the optional status monitoring configuration instructions).