2.4 Screen setting
When your computer is connected to two screens in the extended mode, you can choose the corresponding work area of the
monitor in the setup screen area.
1. Monitor 1: Choose this monitor, the cursor can only move accordingly in your main monitor.
2. Monitor 2: Choose this monitor, the cursor can only move accordingly in your second monitor.
3. All desktop area: Choose this, the cursor can move from Monitor 1 to Monitor 2.
Click the screen calibration button to enter the calibration interface. You will calibrate the screen automatically by using the pen
to click the the cross shown on the screen.
By clicking "Restore to Defaults" button it will restore the original calibration.
2.5 Calibration
Pressure sensitivity: move the slider from left to right; it can be used to adjust sensitivity of the tip and the severity of the stroke.
2.6 Pen Pressure Sensitivity Settings
8
-8-
