Charging the Battery
Method 1 - Batteries remain in scooter:
Follow the procedure below step by step:
1. Turn the power switch to OFF.
2. Connect the charger’s power cord into the power outlet.
The LED should be red.
3. Open the charging socket cap on the tiller.
Then connect the charger’s round plug to the
charging socket.
4. The charging time is about 6 hours. To ensure
optimum performance a 10-hour charge time
is recommended.
5. The red LED will turn green when charging is complete.
6. Turn off the charger, disconnect the power cord and the
round plug from charger socket on the tiller.
Method 2 - Battery pack is removed from the scooter:
Follow the procedure below step by step:
1. Turn the power switch to OFF
2. Remove the battery pack by lifting it out by the handle.
3. Connect the charger’s power cord into the power outlet. The LED should be red.
4. Connect the charger’s round plug to the charging socket of the battery pack.
5. The charging time is about 6 hours. To ensure optimum performance a 10-hour charge
time is recommended.
6. The red LED will turn green when the charging is complete.
7. Turn off the charger, disconnect the power cord and the round plug from the socket on
the battery pack.
ATTENTION
While returning the battery pack to the
scooter, be careful not to get your
hands or fingers caught.
18
Battery Charging and Care
3
Arrow
Round plug
Summary of Contents for Scooter
Page 1: ...Scooter Anywhere you want to go Owner s Manual Instructions ...
Page 2: ......
Page 31: ......