background image

 

ThurayaIP Satellite Modem User Guide

 

5

 

2.

 

If you have PIN security enabled on your SIM, you will be prompted 
to enter your PIN before proceeding. 

 

Note

:  You must have a valid GPS location for the compass 

direction and Antenna Angle to be displayed. If the GPS is 

not valid, go back to step 3 and allow 

Thuraya

IP

 to obtain a 

GPS fix. 

 

 

Home Page Satellite Location Display

 

3.

 

Look at the wMMI home page display and note the compass 

bearings and elevations for both 

Thuraya

IP

 satellites in the “Satellite 

Location” section. The recommended satellite for your location will 
be highlighted in green. With the 

Thuraya

IP

 terminal upside down, 

use the integrated compass to determine 

the direction of the recommended satellite. 
You must be able to obtain a clear view of 

the satellite in the sky for the 

Thuraya

IP

 to 

connect to the network. If the 
recommended satellite is obstructed from 

your location, consider using the alternate 
satellite instead. If neither satellite is

                             Compass

  

accessible from your location, you will need to move to a location 

that has visibility to at least one of the satellites.                                             

Compass Direction Antenna Angle

Summary of Contents for ThurayaIP























































Reviews: