Hughes HN9600, User Manual

Page: 18 / 36

Chapter 2 • System Control Center
18
1039706-0001 Revision A
On any of these screens, if a parameter name or the current value of a parameter is
underlined, you can click the name or value to see an explanation of it.
Figure 8: Format of status and information screens
Refer to the sections below for an explanation of the parameters unique to each
screen.
•
System Status page on page 19
•
Reception Information page on page 20
•
Transmission Information page on page 22
•
System Information page on page 24
Red flag indicator
On the status and information screens, a red flag next to a value indicates a problem
related to the parameter listed in the same row where the flagged value appears. The
flagged value appears in the right column; the parameter appears in the left column.
The value indicates the current state of the parameter.
If you see a red flag, you can click the underlined parameter value in the right column
to see additional information about the problem.
Features a customer may not see
A customer may see descriptions of certain features in the satellite modem user
guide that do not appear on their System Control Center screens. This is because
some features may be enabled or disabled by the NOC depending on the customer’s
service plan or customer-specific requirements. If a feature is not enabled the screen
or screens for that feature or links to it do not appear. Features that may be enabled
or disabled by the NOC are:
•
Web Acceleration