Description of destination page
Destination
Button
Displays statistics about the transmitted data and transmit
connection status. For more information see
on page 27.
Transmission Information
page
Transmission Info
Displays detailed information about the operational status
of the satellite router. For more information see
on page 29.
Terminal Status page
Terminal Status
Displays system information such as ST Name (assigned
name of the satellite router name) and operational software
System Information page
System Info
version. For more information see
on page 31.
System Status button
The System Status button (only) is a status indicator as well as a link. It changes color to indicate
the satellite router’s current status, as explained in
Table 4: System Status button colors
on page
16. To see more detailed status information, click the System Status button to open the System
Status page.
Table 4: System Status button colors
Meaning
Button color
OK – The satellite router is fully operational. The user can browse the Internet
as long as on the router has been activated for broadband service.
Green
Degraded – The router is fully operational but in a degraded mode. Performance
is slower than normal for any of the following reasons:
Yellow
• The satellite router is in VADB mode, using a backup phone line connection
to the Internet instead of the satellite link.
• The router is in fallback mode.
• One or more TurboPage TTMP connections is not functioning.
• Transmissions beyond a certain threshold number have not been received
by the satellite (state code 30). This could be caused by weather conditions.
Degraded – The router is fully operational, but performance is temporarily
impaired because:
Orange
• The daily download allowance has been exceeded. This allowance does
not apply if the subscriber’s service plan has no download limit. For more
information see
Checking download allowance status
on page 39
• Not all IPSec sessions are functioning. As a result, data will not flow between
some destinations.
There is an operational problem. The router cannot access the satellite network.
Red
If the System Status button is red
or yellow
, you can look for a red flag next to any value
or values on the System Control Center information pages (those with tables listing parameters
HN9500 Satellite Router User Guide
16
1037737-0001 Revision E
System Control Center
Chapter 2