Range of values
Typical values
Parameter
Enabled
Disabled
Enabled
DNS Acceleration Status
Note:
The Terminal Status page also displays numerous statistics that are not listed in this table. These
statistics are displayed by category, beginning with the Transport Interface Receive Statistics category.
For all of the statistics not included in this table, the typical value is any whole number greater than zero.
System Information page
The System Information page shown in
Figure 19: Terminal Status page (top part)
on page 31
provides system information for the satellite router such as ST name (router name), Site ID (Site
Id), and operational software version.
Figure 20: System Information page (top part)
The operational parameters listed on the System Information page are shown in a tabular format.
The first (left) column identifies the parameter categories:
• Identification – Contains system ID information such as Site ID (installation site ID) and
ST name (a unique name that identifies the satellite router).
• Software – Contains version information on the various software applications resident on
the satellite router such as commissioning and operational software. (Commissioning refers
to initial start-up of the router.)
• Satellite – Contains information pertaining to communication with the satellite such as
antenna size, transmit radio wattage, and uplink transmission mode.
31
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Chapter 2
System Control Center