Hughes HIRD-D01, Owner'S Manual

Page: 57 / 74

THE DIGITAL SATELLITE RECEIVER’S MENU SYSTEM
P
AGE
7-7
menu screen to remind you that the digital satellite receiver is locked.
REMEMBER YOUR CODE! You will need this code whenever you wish to override the lock or to
unlock the digital satellite receiver.
Unlocking Procedure
To remove the lock and its restrictions, highlight the Unlock button and press the key.
When the SYSTEM UNLOCK pop-up panel appears, you can use
the and keys or the remote control number keys to enter the
four-digit passcode that you used to lock the digital satellite receiver
earlier. If you enter the code using the number keys, you will not see
the numbers appear on the screen.
After entering the passcode, highlight and select OK . Once the
digital satellite receiver has been unlocked, all limits and
restrictions are removed!
Otherwise, choose Cancel to keep the
lock in effect.
If you forget your four-digit code, call your service provider for
assistance.
Temporarily Overriding the Lock
There are times you may wish to temporarily remove the restrictions imposed by locking. You can do
this without unlocking the digital satellite receiver. When you press
, when prompted, the
LOCK OVERRIDE pop-up will be displayed. It looks and navigates just like the SYSTEM
UNLOCK pop-up.
Note: Once the correct four-digit code is entered, the digital satellite receiver will remain
unlocked until you power the digital satellite receiver off. At that time all locks and limits will be
enforced again.
The UNLOCK pop-up panel
The LOCK OVERRIDE pop-up panel on video The LOCK OVERRIDE pop-up panel on menus