4.
MOVING THE EXISTING DRIVE
4.1.
After you have moved the jumper to the proper setting, place the hard drive
bay upside-down on the TiVo lid, with the drive label down and the drive connectors
facing the front of the TiVo.
4.2.
With the hard drive bay upside down on the TiVo lid, use your larger Torx
screwdriver and remove the four screws connecting the hard drive to the hard drive bay.
Do not confuse these screws with the four screws you removed from the back of the TiVo
before removing the lid.
4.3.
Slide the hard drive that you just unscrewed to the end of the hard drive
bay, being sure that four screwholes in the drive are aligned with the four previously
unused holes in the drive bay. Reconnect the hard drive to the drive bay using the four
screws that you just removed. We have found that the easiest way to attach the drive to
