Hughes AN8-098R, Installation Manual, Page: 28 / 62

Chapter 2 • Antenna parts and required tools
14
1037752-0001 Revision A
Small hardware
parts list
Table 1 lists the small hardware parts included in the antenna kit.
Table 1: Small hardware parts
Part Quantity
Listed parts are
used to attach . . .
Illustration showing
where parts are used
5/16-inch x 1-inch carriage bolts 5 Reflector bracket and tilt plate
and to Az/El mount assembly Figure 11 on page 19
5/16-inch flat washers 5
5/16-inch lock washers 5
5/16-inch hex nuts 5
5/16-inch x ¾-inch hex head
self-tapping bolts 4 Feed support arms to reflector
bracket Figure 13 on page 21
5/16-inch flat washers 4
5/16-inch x 1¾-inch hex head
self-tapping bolts 4 Tailpiece to feed support arms Figure 14 on page 22
5/16-inch flat washers 4
5/16-inch lock washers 4
5/16-inch hex nuts 4
5/16-inch x ¾-inch carriage bolts 5 Reflector to Az/El mount
assembly Figure 16 on page 23
5/16-inch serrated flange nuts 5
5/16-inch x ½-inch hex head bolts 2 Radio assembly (transmitter) to
tailpiece Figure 18 on page 25
5/16-inch flat washers 2
5/16-inch lock washers 2
O-ring 1 Feed horn to radio assembly Figure 22 on page 29
#6-32 (3mm) hexagonal socket
head (Allen) screws 2
#6-32 (3mm) flat washers 2