INETVU® MOBILE SYSTEM QUICK START – HUGHES KU
C-COM Satellite Systems Inc
Page 19
6.
Complete the
Satellite Parameters, DVB Settings
and
Search Method.
Mouse over each
selection for a detailed description. Click Finish when complete.
Satellite Parameters:
Longitude:
Satellite you will be searching on
RX:
Receive Polarity (Vertical or Horizontal)
LNB Power:
Select when controller will be powering the LNB, otherwise disable
LNB LO:
LNB LO Freq. (GHz)
DVB Settings:
Transponder No:
Select a Transponder No. to save configuration to
DVB Type:
Carrier Type (DVB-S1 or DVB-S2 ACM)
Frequency:
L-Band Frequency (KHz)
Symbol Rate:
Symbol Rate (Ksps)
FEC:
Code Rate
Search Method:
DVB Search:
DVB will search directly on DVB-S1 or DVB-S2 carrier and lock on it. For user
wishing to use the DVB Search Method the DVB Settings are required for satellite
acquisition. Please ask your service provider or NOC for a valid DVB Carrier.
RF Search:
RF will allow the user to base satellite searching and peaking strictly on RF
instead of DVB. The controller will then peak on the modem signal when the
satellite is found. Use if you have no DVB carrier.
Duplicate the settings for all satellites:
Selecting this will duplicate parameters across all Satellite No. 0 ~ 4
