INETVU® MOBILE SYSTEM QUICK START – HUGHES KU
C-COM Satellite Systems Inc
Page 11
1.10 Software Setup and Initial Configuration Procedure with Hughes
Service
1.
If you are using the network interface to communicate with the 7000 Controller, set the
PC/Notebook to the same network as the 7000 Controller.
(If you are using the USB interface,
you may skip to the Software Installation)
2.
Open
Network and Sharing Center\Network
Connections
, right-click your network card, and select
Properties
.
3.
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
.
4.
Select
Use the following IP address
.
Set your PC to the same subnet as the 7000 Controller.
IP Address:
A.B.C.D+2
Subnet Mask:
255.255.255.0
Gateway:
A.B.C.D (Modem/Router IP)
The Gateway is usually the Router IP address. If no router is used, it
is usually the VSAT Modem IP Address.
Set the DNS IP Addresses if required.
