1035930-0001 Revision 2
7-4
Azimuth, elevation, and polarization lock down
1.
After the antenna is peaked, lock down the azimuth hardware by tightening the two 5/16-inch
bolts in the AZ/EL assembly. See Figure 21.
2.
Lock down the elevation hardware by tightening the three 5/16-inch bolts in the elevation
bracket.
3.
If installing an RA6-074 system, lock down the polarization by tightening the four 5/16-inch bolts
in the reflector support.
4.
If installing an RA6-TG system, lock down polarization by tightening the transceiver bracket
screws. See Figure 14, and refer to documents provided with the transceiver for additional
instruction.
Azimuth lockdown
hardware
Elevation lockdown
hardware
Polarization lockdown
hardware (4 places)
FIGURE 21
Summary of Contents for DIRECWAY
Page 27: ...1035930 0001 Revision 2 8 4 ...
