WE AT HUGHES & KETTNER WOULD LIKE TO CONGRATULATE
YOU ON YOUR CHOICE OF THE ATTAX PREAMP!
The HUGHES & KETTNER ATTAX preamp is designed to meet the rigorous demands
placed on contemporary musicians: superior sound quality, flexibility, and user-
friendly operating define the
ATTAX
as a valuable tool in your quest for the ultimate
sound.
The streamlined operating and control concept enables you to immediately dial in
hot sounds. No fuss, no endless knob twiddling.This Operator’s Manual introduces
you to the ATTAX's features and options.
3 CHANNELS - THE STANDARD OF THE 9 0 ' s
The ATTAX features three separate channels: One
solid state
CLEAN for vintage and
contemporary clean tones. The two
tube channels,
CRUNCH
and
LEAD, are carefully
tuned for a broad overdrive spectrum, from a slight crunch to heavy duty shred.
TWO EFFECTS LOOPS!
The ATTAX features
two separate loops
for effects/multi-effects devices: a standard
MONO FX LOOP with SEND and RETURN jacks and a STEREO LOOP with a SEND
and two RETURN jacks (Left/Right).
STEREO SETUP - NO PROBLEM!
The output, effect, and master sections feature stereo circuits enabling stereo setups,
o. g. with a stereo power amp and two cabinets. Stereo effects processors can be
added through the STEREO LOOP for optimum effects utilization.
FREQUENCY-CORRECTED RECORDING OUT JACKS
The two
Recording Out jacks
feature frequency-corrected signal paths that simulate
the sound of a miked 4 x
12"
cabinet, an ideal tool for home recording, studio
situations, and on stage DI to the mixer.
MIDI - THE ULTIMATE CONTROL FEATURE!
The
MIDI option
requires no soldering. Installation is simple, and offers the ATTAX
user all the comfort of MIDI capabilities. All three channels and the effects loop can
be called via MIDI program change messages.
We
hope you have fun and enjoy success with your
ATTAX!
