1.0 CHANNELS
The CLUB REVERB features a newly developed
preamp that not only produces authentic harmonic
overdrive but also responds dynamically to your
picking style. Based on semiconductors, this innova-
tive circuitry simulates the sound-shaping elements
of tube amps and delivers sound quality unparalleled
in this price range. It also provides the dynamics
demanding guitarists require for musical expression.
CLEAN:
Depending on the preamp control settings, the CLUB
REVERB delivers a variety of contemporary and
vintage clean tones. At higher VOLUME settings, the
"SoftClick" circuitry delivers that slight edge you
would expect from a vintage tube amp. If desired,
the CLEAN channel can put out plenty of crunch.
LEAD:
The Voicing control on this channel enables you to
achieve a broad spectrum of lead tones ranging from
the classic 'British' style of wide-open rock sounds
with a very in-your-face character to the more
'American' style of blues sounds that are extremely
responsive to the way you attack the strings.
Experiment with various settings of the Voicing
control, Lead Gain and Lead Master - and your
dynamics - and you'll discover a wealth of tone.
REVERB:
In the signal chain, the CLUB REVERB reverb section
is located after the FX loop so you can use it for
external effects and still achieve a clean reverb
sound.
2.0 JACKS AND CONTROL FEATURES
2.1. FRONT PANEL:
INPUT: Input sensitivity is broad enough to handle guitars
equipped with humbuckers, active pickups, or single coils.
CLEAN VOL: Determines the CLEAN channel's volume.
Depending on the type of pickups in your instrument, the amp
will begin to clip somewhere around the 12 o'clock setting
(SoftClick). The special SoftClip circuitry in this channel enables
you to achieve the sound of a vintage tube amp gently overdri-
ven to the point where it just starts to 'break up'.
