HUGH CRANE (Cleaning Equipment) Ltd
–
COMMANDO
®
1000 Range BARROW UNIT
J\Engineering\Manuals\COMMANDO MANUALS UPDATE2017Manual Commando 1000Range_Update2017
- 15 -
from the bottom of the tank and not placed too close to the return hose as illustrated
below.
h)
Turn the three position valve to the ‘bleed’ position before starting the engine.
i)
With stop control in the start position, turn
the ignition key to start the unit.
In cold weather conditions hold the
ignition key in the heater position marked,
for 15 to 20 seconds prior to turning to
start the machine. (Refer to the Hatz
engine instruction manual). Run the
engine at approximately
⅓
rd
of full speed
up to bleed any air out of the system.
SUCTION
HOSE
RETURN
HOSE
50mm MIN
X
SUCTION HOSE
FLATTENED
STRAINER
X
ON BOTTOM
TOO CLOSE
RETURN HOSE
X
ENGINE STOP
LEVER
THROTTLE LEVER
3 POSITION
VALVE
BYPASS HOSE
COUPLING
BLEED PIPE
HIGH PRESSURE
OUTLET NIPPLE
ENGINE STARTER PANEL
