Huger PM 138 H, User Manual, Page: 6 / 12

EL
Resets count-up count-down timer
the time or count-down timer
CR2032
cell
BATTERY INSTALLATION: MAIN UNIT
I.
Carefully unscrew the back panel.
2. Insert one 1) CR2032 3V lithium cell or equivalent
[FIG.
3.
Replace the battery compartment door.
Note: If not disposed properly, batteries can be
harmful. Protect the environment by taking exhausted
batteries to authorized disposal stations.
WEARING THE PULSEMETER
With the attached cord. the device can be like a necklace [FIG. C].
Alternately. the cord can be used to secure the device to a waist belt
Note: Optionally sold. a specially designed wrist
strap worn in the
as
[FIG. D]
and
[FIG. E].
WEATHER RESISTANCE
for outdoor this product is weather proof and can
under normal conditions. Avoid prolonged exposure to extreme
weather conditions such as extreme cold or rain.
ABOUT THE CLOCK
In clock
unit will display the time. The time can be displayed in a
hour or 24-hour format as hours. minutes and seconds.
set the current
If the count-up down timer is displayed, press [MODE SET] to
enter the clock mode [FIG F]. From pulse mode. press [PULSE.] to
exit pulse mode followed by [MODE SET] to toggle between clock
and count up down timer modes.
In clock mode. press and hold SET] for two seconds. The
flash.
Press to make a selection between 12-hour and
24-hour format.
2