22
A
ssembly
Coaster Brakes
These models are equipped with a rear ‘coaster’
brake that is operated by rotating the crank
backwards.
Operate the coaster brake as follows:
• Push the pedals backward to move the
chain backward
• The chain activates the coaster brake
mechanism that is inside the rear wheel
hub
• As you push the pedals backward with
increasing force, the braking action of the
coaster brake increases.
If your bicycle has a caliper brake(s) in addition to the coaster brake, always use the
coaster brake as the main brake to stop the bicycle.
WARNING:
If you do not
obey the following instructions,
injury to the rider or to others can
occur :
• When you ride the bicycle
the fi rst time, test the coaster
brake and practice using
it at a low speed in a large
level area that is free of
obstructions.
• Every time the bicycle is
ridden, make sure the clamp
A
on the brake arm
B
is
securely attached to the chain stay
C
of the bicycle frame. The coaster brake will not
work correctly if the brake arm is not attached to the chain stay.
C
B
A
