15
➍
Push on the car so the chassis rests fl at
atop both droop blocks at front and rear.
➎
Read the camber setting from the
camber gauge of each of the four set-up
stands.
Each graduated mark indicates a 1° camber
value. You should be able to set camber
with a resolution of 0.5°.
ADJUSTING CAMBER
FRONT CAMBER
Increase
(more –ve)
SHORTEN the front upper camber link.
Decrease
(less –ve)
LENGTHEN the front upper camber link.
FRONT CAMBER
Increase
(more –ve)
SHORTEN the rear upper camber link.
Decrease
(less –ve)
LENGTHEN the rear upper camber link
NOTE:
Changing the front camber will affect front toe. After setting the camber you must re-
adjust the toe and then re-check the camber settings again. It may take a few repetitions
of these steps to ensure that both camber and toe are set to the desired values.
REAR CAM
B
ER
