9
Figure 19
Figure 18
12. INSTALLING THE
LIGHT BULBS &
GLASS SHADE
1. Install 3 x 40W candelabra bulbs (not
included). (Fig. 19)
2. Install the glass shade assembly to the
mounting plate with screws provided. (Fig.
19)
3. Restore power and your light kit is ready
for operation.
11. INSTALLING THE
LIGHT PLATE
NOTE:
Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box. Turning power off using the fan switch
is not sufficient to prevent electric shock.
Step 1. Loosen the 3 screws from the
mounting plate.
Step 2. Raise and hold the light plate close to
the mounting plate and proceed to do the
wire connections. Connect the white wire
connectors from the light plate and fan,
follow the same procedure with the black
wire connectors. (Fig. 18)
Step 3. Tuck connections neatly into
mounting plate, Place the light plate key
holes over the 3 screws previously loosened
from the mounting plate, turn light plate
until it locks in place at the narrow section
of the key holes. Secure by tightening the 3
screws previously loosened. (Fig. 18)
Bulbs
Glass shade
assembly
Mounting plate
Screws
Mounting plate
Connection plugs
Light plate
Screws x 3
