7
• Image Sensor
•
1/2.8”, 2.14 million effective pixels, HD CMOS sensor.
• High quality telephoto lens supporting 20X optical zoom and optional 12X digital zoom.
• Full HD 1920x1080p resolution up to 60 frames per second.
• 2D & 3D noise reduction with our latest “low noise CMOS sensor”.
•
Wide angle 59.5° horizontal field of view.
• Dynamic Range Control (DRC) for higher image quality and detail across simultaneous-
ly well-lit and shadowed scenes.
•
High SNR (signal to noise ratio) of the CMOS sensor (≥55dB), combined with 2D & 3D
noise reduction algorithms, effectively reduces noise, even under low illuminated condi
-
tions.
• Video Outputs
• Simultaneous NDI®|HX using NDI® 4 / IP network streaming, USB 2.0, 3G-SDI, &
HDMI 1.4 o USB 2.0 Full HD video output up to 1080p 30 frames per second.
• 3G-SDI Full HD video output up to 1080p 60 frames per second.
• HDMI 1.4 Full HD video output up to 1080p 60 frames per second.
• RTSP, RTMP, & RTMPS streaming using H.264 or MJPEG.
• Line level audio embeds over NDI®|HX / network stream. Uses AAC audio encoding for
better sound quality and lower bandwidth usage.
• Control and Settings
• Automatic tracking of active participant.
•
NDI®|HX control through NDI® approved platforms that offer control
• HuddleCamHD VISCA & VISCA over IP
• IR Remote Control
• RS-232 VISCA & Pelco-D control
• Installation
• Standard 1/4-20 female thread for camera mounting
• 12V DC 2.5A Power Supply
• PoE+ 802.3af
• Warranty
• 3-year warranty
Features
• All-in-One Solution - The SimplTrack Lite does not require a dedicated computer to oper-
ate. This simplifies deployment and provides a more seamless less-complicated solution
you can rely on for the long term. No need to manage dedicated auto-tracking software,
this camera can be tuned to your room and set to operate trouble-free and independent
from additional hardware.
• Dedicated Management Software - The SimplTrack Lite features dedicated camera man-
agement software that can be controlled from any Windows computer on the network. You
don’t need a dedicated computer to run the system You can use any Windows PC running
the Management Software to remotely manage the cameras when necessary.
