HuddleCamHD HC-JOY-G2, Installation & Operation Manual

Page: 7 / 10

Rev 1.0 8/16

Move Joystick “left” and “right” to select the desired
control protocol or baud rate (to match that of camera).

Repeat for all camera IDs required.

Press “Esc” to return to previous menu level.
o
“SET >>SYS” : Menu
 Move Joystick “left” and “right” to select system parameter
to configure.

Press “Enter” key to confirm the choice.

1(EDIT PW)

OLD PW: Using “Number” keys, enter the current
password (default = “8888”). Press “Enter” key to
confirm.

NEW PW: Using “Number” keys, enter the desired
password (4 numeric keys) Press “Enter” key to
confirm.

AGAIN PW: Using “Number” keys, re-enter the desired
password (4 numeric keys) Press “Enter” key to
confirm.

2(FACTORY)

SURE?: Press “Enter” key to confirm.

3(LOAD ISP)

Press “Enter” key to confirm.

SURE?: Press “Enter” key to confirm.

4(SOUND)

Move Joystick “left” and “right” to turn key beep ON
or OFF.

Press “Enter” key to confirm.

5(KB ID)

KB ID: Using “Number” keys, enter the desired ID.
Press “Enter” key to confirm.
 6(LOCK SET)

Move Joystick “left” and “right” to turn KB lock ON or
OFF. Press “Enter” key to confirm.

LOCK PW: Using “Number” keys, enter the desired
password (4 numeric keys). Press “Enter” key to
confirm.

To unlock Keyboard/Joystick
o
Press “Esc” key until LCD shows “LOCKED”
o
LOCK PW: Using “Number” keys, enter the
desired password (4 numeric keys). Press