7
Bolted together Track
Flush & Level
Track on level ground, free of
obstructions
Moveable dogs on one side
Track Stops
Squaring
Pin
Operator’s Side
Track
Bolts
Correct Track Set-Up / Layout
Moveable Log Dog
4 - The track comes with four yellow track stop tabs and the bolts to fasten them to the
track. Place the track stops at the four end corners, then bolt on the inside of the track.
Place them on the inside corner of the track, secure them into place with the bolt and
nut provided. The track stop tabs are placed at an angle over the track to prevent the
mill head from rolling off the track at each end . (see fig. C)
fig.A
fig.B
fig.C
5 - To saw a board accurately, the track needs to be straight and flat. To obtain this, use a
string tied tight from end to end or a level. If the track/trailer has a crown or dip, you
will not be able to saw a straight board. (see fig.D below.)
Correct Track
(side view)
Incorrect
Dipped Track
fig.D
NOTE : If you set up on soft or frozen ground it’s best to check the track daily for level-
ness due to changing weather and temperature.
