Huck Rebel 2022, Owner'S Manual, Page: 22 / 42

Battery maintainence
When charging, the LED will light up and the charger fan will come on.
Charge 6-8 hrs. or until the charger LED light is solid green for a full charge. 2hrs for 70-80% charge.
To charge the battery, grab the charger that arrived with the bike. (charge when battery is between 20-30% remaining)
Plug the charger directly into a wall outlet. Using an extension cord is bad and can damage the charger... so please don't do it.
Under the tank plate, you will find a passthrough charger port, connect your charger to this port.
The LED light on the charger should light up. If not, check the on/off switch on the back of the charger (some chargers only).
Unplug the charger from the charging port and then the wall socket.
Battery & charging
Step 1
Step 2
Step 3
step 4
step 5
Keep away from any sparks or flames..
Do not charge if cables, charger, or power supply are damaged.
Use charger in dry, indoor conditions between 40 - 100 degrees Fahrenheit only and with adequate ventilation.
When finished: replace the waterproof cap over the charging socket on the power supply.
If a charge error occurs, disconnect the charger from the power supply and wall socket. Reconnect. If flashing persists, contact
your Huck Dealer.
When charging:
OWNERS MANUAL
|
2022.
|
22