Huck Rebel 2022, Owner'S Manual, Page: 12 / 42

Lights & Controls
Light Controls
On the left side of the handlebar you will find the lights control
switch:
1. Headlight high/low beam
2. Indicators (turn signals)
3. Horn
4. S - Sport Burst
The headlight and tail lights are turned on via the slider on the
right side or throttle side switches.
Ensure your lights are on at all times while riding, and ensure
you manually slide the turn signal switch back to the center
each time they are used.
The
High Beam
function is activated by pushing the headlight
switch forward. The headlight must be on low beam while
driving behind or coming at other vehicles.
Sport Burst
- this button when pushed and held, provides a
momentary burst of power to the bike. To accomplish this, the
controller is pulling a lot of amperage from the battery to send
to the motor. Do not use for more than 8 seconds, or you will
damage the system.
OWNERS MANUAL
|
2022.
|
12
2
Lighting
The Rebel makes use of low energy LED lighting for all lighting
sources. The DOT approved headlight has running, high and
low beam modes for maximum visibility, both on the road and
trail. Do not use the high beam during the day, when coming up
behind a vehicle, or when approaching oncoming traffic.
The rear light incorporates the tail light, brake light, and number
plate illuminating light into one unit. Turn signal lights are also
able to be connected to the tail light for simple rear layout
(optional).
DOT approved turn signals are provided in the front and rear.
The system is connected via a Huck specific wiring harness. If
replacement lights are needed, please reach out to Huck or
your Huck dealer.