Huck Alcoa BobTail SF46, Instruction Manual, Page: 8 / 16

SF46 BobTail® Installation Tooling
(HK1181)
Alcoa Fastening Systems & Rings
8


 


Figure 1
t
ool to
p
owerIg
s
etup
1 . Set Pull and Return pressures on Powerig using
Huck Gage P/N: T-124833CE and Table 1 .
2 . First connect the Hydraulic Hoses to the Powerig .
3 . Connect the other end of the Hose Assembly to the
installation tool .
4 . Connect the Power Cord from the Tool to the Hose
Assembly .
5 . Connect the Power Cord from the Hose Assembly
to the Powerig .
6 . Once the system is set up, turn on Powerig
and install test fastener . Check to be sure that
the fastener is installed correctly . This can be
checked by using the appropriate swage gauge .
WARNING: To prevent tripping hazard,
suspend tools and route hoses off of
floors.
WARNING: Only use compatible
equipment with this tool.
p
ressure
s
ettIngs
Table 1
Fastener
Size
Grade 5
Pull (psi)
Grade 5
Return
(psi)
Grade 8
Pull (psi)
Grade 8
Return
(psi)
Class 8.8
Pull (psi)
Class 8.8
Return
(psi)
Class 10.9
Pull (psi)
Class 10.9
Return
(psi)
-24 (3/4”) 3400 2000 5200 2800 - - - -
20mm - - - - 3400 2000 6400 2850
-28 (7/8”) 4300 2900 - - - - - -
-32 (1”) 5500 3200 7400 4300 - - - -