Hubsan H501S X4 AIR, User Manual

Page: 37 / 238

37
5 F lying In GPS Mode / Return to Home
1) In GPS Mode, the aircraft must accumulate 6 or more satellites before its motors will
arm. Flip the GPS switch up to turn the GPS on. Flip the GPS switch down to turn the GPS
off.
2) Return to Home: the aircraft must accumulate 6 or more satellites in order for the
function to be active.
3) Be sure to receive GPS satellite signal in an open and unobstructed environment. The
process lasts for around 3 minutes. GPS signal strength is related to the flight
environment.
6 Return To Home Mode
Entering Return to Home Mode
Make sure GPS mode is on (the GPS is up). Then,
flip the RTH switch up to activate Return to Home
mode. The flight control system will command the
aircraft to return to its designated "home" point.
Users can either allow the flight system to land the
aircraft automatically, or exit Return to Home and
land the aircraft manually.
Exiting Return To Home Mode
Flip the RTH switch down to exit Return to Home
mode. Continue to fly or the aircraft manually.