Installing and removing propellers
Installation: Before installing propellers for the first time, please check that
each Propeller A is matched with motor A and each Propeller B is
matched with motor B. Align the "I" with the flat side of the "D" shaped
motor shaft. Then use the provided screws and screwdriver to secure
each propeller. Propeller A’s are paired with black propeller screws and
are tightened counterclockwise. Propeller B’s are paired with silver
propeller screws and are tightened clockwise. (as shown below)
Removal: If propellers need to be changed, please uninstall as shown
below with a screwdriver. Propeller A’s are paired with motor A shafts and
are untightened clockwise. Propeller B’s are paired with motor B shafts
and are untightened counterclockwise.
Propeller A
Propeller B
Propeller B
Propeller A