![background image](http://html1.mh-extra.com/html/hubsan/h111d/h111d_instruction-manual_2180973015.webp)
● Do not mix old and new batteries ● Do not mix different types of batteries
● Do not charge non-rechargeable battery.
8.2 INSTALL THE TX BATTERY
Close the cover
Remove the cover
Install 4 x AA batteries
according to the correct polarities
PUSH
PUSH
1. When the power on the transmitter runs low, the red LED will blink quickly and the
LCD screen will turn black, also the transmitter and Q4 may disconnect. Please replace
with new batteries.
2. If the batteries in the transmitter runs low while flying the Q4, you can still control the
Q4, please land the Q4 and then replace batteries.
3. The Transmitter can only use 2S Lipo batteries, 4XAA batteries or NI-MH AA
batteries, other batteries will damage the Transmitter.
Notice
:
15
©
2016 Hubsan
哈博森科技 版权所有
8.3 VIDEO REPLAY SETUP
If you would like to replay the previous videos on transmitter, then follow the instructions
below.
Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to
enter into MAIN MENU interface. Push the Elevator stick up/down to select “Play Record”.
Select “Exit” to exit.
Summary of Contents for H111D
Page 1: ...NO H111D Q4 FPV PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE 14...
Page 2: ......
Page 22: ......