Hubner TDP 1,2 Series Operating And Assembly Instructions Manual Download Page 5 | Manualshive

Page: 5 / 54

background image

D.C. tachometer generator TDP 1,2

5

TDP1,2-MANUALen_R5(2018-12-19)ID74713 .doc

1

General

1.1

Information about the Operating and Assembly Instructions

These Operating and Assembly Instructions provide important instructions for working with the device.
They must be carefully read prior to starting all tasks, and the instructions contained herein must be
followed.
In addition, applicable local regulations for the prevention of industrial accidents and general safety
regulations must be complied with.

1.2

Scope of delivery

Scope of delivery includes the D.C. tachometer generator TDP 1,2 and the Operating and Assembly
Instructions.

1.3

Explanation of symbols

Warnings are indicated by symbols in these Operating and Assembly Instructions. The warnings are
introduced by signal words that express the scope of the hazard.
The warnings must be strictly heeded; you must act prudently to prevent accidents, personal injury,
and property damage.

WARNING!
Indicates a possibly dangerous situation that can result in death or serious injury if it
is not avoided.

CAUTION!
Indicates a possibly dangerous situation that can result in minor injury if it is not
avoided.

CAUTION!
Indicates a possibly dangerous situation that can result in material damage if it is not
avoided.

NOTES!
Indicates useful tips and recommendations as well as information for efficient and
trouble-free operation.

NOTES!
Mounting and disassembly by means of a hymmer or similar tools is not permitted.
(Warranty void).

DANGER!
Life-threatening danger due to electric shock!
Indicates a life-threatening situation due to electric shock. If the safety instructions
are not complied with there is danger of serious injury or death. The work that must
be executed should only be performed by a qualified electrician.

«
...
3
4
5
6
7
...
»

Summary of Contents for TDP 1,2 Series























































Reviews:

No comments

Related manuals for TDP 1,2 Series

Brand: i-box Pages: 56

FM RDS/DAB Digital Radio RD-50CFM

Brand: Roberts Pages: 20

Brand: Quantum Composers Pages: 3

Brand: OWI Pages: 1

Brand: Sangean Pages: 151

Brand: Clarke Pages: 28

Brand: Curtis Pages: 1

Brand: Whisper Tech Pages: 98

Brand: Greenlee Pages: 22

Brand: Kärcher Pages: 154

Brand: Scheppach Pages: 36

Brand: Promate Pages: 7

Brand: Promate Pages: 48

Avalanche SP-1775

Brand: Panacom Pages: 12

Brand: Panacom Pages: 16

Brand: Panacom Pages: 16

Brand: Oras Pages: 2

Brand: NGS Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands