Incremental Hollow Shaft Encoder FGHJ INOX
FGHJ INOX_Manual-en_R0
17
6. Close the hollow shaft device with the terminal box cover (5) by turning it clockwise. Use the
special key for this.
7. Fastening the torque bracket:
Screw the torque rod (6) with the screw (7), washer(8) and nut (9) to the torque arm (10).
The ideal angle of torque bracket (10) to the link rod (6) is 90°.
Secure the link head (11) of the link rod (6) to a fixed point (for example on the motor housing).
NOTES!
Once fitted the link rod must rotate easily around the link rod heads! Failure to observe
this point may result in damage to the bearings!
NOTES!
The link heads are maintenance free. However, ensure they remain free from soiling
and paint!
The torque arm can be screwed to the housing cover offset by 180°. For this purpose, the two fixing
screws 1 and 2 and the two screw plugs 3 and 4 must be loosened and the retaining plate must be
reattached in the other position. A special sealing of the threaded holes is not necessary.
1
2
3
4
Summary of Contents for FGHJ INOX
